A self-portrait taken by NASA's Curiosity rover on June 15, 2018. A Martian dust storm has reduced sunlight and visibility around the planet, including at the rover's location in Gale Crater.
A self-portrait taken by NASA's Curiosity rover on June 15, 2018. A Martian dust storm has reduced sunlight and visibility around the planet, including at the rover's location in Gale Crater.
NASA/JPL-Caltech
NASA's Mars Curiosity Rover tweeted out a new image on January 23, 2018: "I'm back! Did you miss me?" The selfie is part of a fresh batch of images the rover beamed back from Mars.
NASA's Mars Curiosity Rover tweeted out a new image on January 23, 2018: "I'm back! Did you miss me?" The selfie is part of a fresh batch of images the rover beamed back from Mars.
NASA/Twitter
Five years ago and 154 million miles away, NASA's Curiosity Mars rover successfully landed on the planet. Take a look back at what the rover has been up to these past five years, including this selfie it took on January 19, 2016.
Five years ago and 154 million miles away, NASA's Curiosity Mars rover successfully landed on the planet. Take a look back at what the rover has been up to these past five years, including this selfie it took on January 19, 2016.
NASA
The bright blue speck in the middle of this image is NASA's Curiosity Mars rover. The image was taken from another NASA spacecraft, Mars Reconnaissance Orbiter, which is in orbit above the planet, on June 6, 2017.
The bright blue speck in the middle of this image is NASA's Curiosity Mars rover. The image was taken from another NASA spacecraft, Mars Reconnaissance Orbiter, which is in orbit above the planet, on June 6, 2017.
NASA
Curiosity has temperature and humidity sensors mounted on its mast. <a target="_blank" target="_blank">Calculations</a> in 2015 based on Curiosity's measurements<a target="_blank"> indicate</a> that Mars could be dotted with tiny puddles of salty water at night.
Curiosity has temperature and humidity sensors mounted on its mast. Calculations in 2015 based on Curiosity's measurements indicate that Mars could be dotted with tiny puddles of salty water at night.
NASA
The Mars rover Curiosity does a test drill on a rock dubbed "Bonanza King" to determine whether it would be a good place to dig deeper and take a sample. But after the rock shifted, the test was stopped.
The Mars rover Curiosity does a test drill on a rock dubbed "Bonanza King" to determine whether it would be a good place to dig deeper and take a sample. But after the rock shifted, the test was stopped.
NASA/JPL
Wheel tracks from Curiosity are seen on the sandy floor of a lowland area dubbed "Hidden Valley" in this image.
Wheel tracks from Curiosity are seen on the sandy floor of a lowland area dubbed "Hidden Valley" in this image.
NASA/JPL-Caltech
The rover recently encountered this iron meteorite, which NASA named "Lebanon." This find is similar in shape and luster to iron meteorites found on Mars by the previous generation of rovers. A portion of the rock was outlined by NASA scientists.
The rover recently encountered this iron meteorite, which NASA named "Lebanon." This find is similar in shape and luster to iron meteorites found on Mars by the previous generation of rovers. A portion of the rock was outlined by NASA scientists.
NASA
Curiosity took this nighttime photo of a hole it drilled May 5 to collect soil samples. NASA said this image combines eight exposures taken after dark on May 13.
Curiosity took this nighttime photo of a hole it drilled May 5 to collect soil samples. NASA said this image combines eight exposures taken after dark on May 13.
NASA/JPL-Caltech/MSSS
This view of the twilight sky and Martian horizon, taken by Curiosity, includes Earth as the brightest point of light in the night sky. Earth is a little left of center in the image, and our moon is just below Earth. A human observer with normal vision, if standing on Mars, could easily see Earth and the moon as two distinct, bright "evening stars."
This view of the twilight sky and Martian horizon, taken by Curiosity, includes Earth as the brightest point of light in the night sky. Earth is a little left of center in the image, and our moon is just below Earth. A human observer with normal vision, if standing on Mars, could easily see Earth and the moon as two distinct, bright "evening stars."
JPL-Caltech/MSSS/TAMU/nasa
The lower slopes of "Mount Sharp" are visible at the top of this image, taken on July 9, 2013. The turret of tools at the end of the rover's arm, including the rock-sampling drill in the lower left corner, can also be seen.
The lower slopes of "Mount Sharp" are visible at the top of this image, taken on July 9, 2013. The turret of tools at the end of the rover's arm, including the rock-sampling drill in the lower left corner, can also be seen.
NASA/JPL-Caltech
The rock on the left, called "Wopmay," was discovered by the rover Opportunity, which arrived in 2004 on a different part of Mars. Iron-bearing sulfates indicate that this rock was once in acidic waters. On the right are rocks from "Yellowknife Bay," where rover Curiosity was situated. These rocks are suggestive of water with a neutral pH, which is hospitable to life formation.
The rock on the left, called "Wopmay," was discovered by the rover Opportunity, which arrived in 2004 on a different part of Mars. Iron-bearing sulfates indicate that this rock was once in acidic waters. On the right are rocks from "Yellowknife Bay," where rover Curiosity was situated. These rocks are suggestive of water with a neutral pH, which is hospitable to life formation.
NASA/JPL-Caltech/Cornell/MSSS
Curiosity shows the first sample of powdered rock extracted by the rover's drill. The image was taken by Curiosity's mast camera on February 20, 2013.
Curiosity shows the first sample of powdered rock extracted by the rover's drill. The image was taken by Curiosity's mast camera on February 20, 2013.
NASA
The rover drilled this hole, in a rock that's part of a flat outcrop researchers named "John Klein," during its first sample drilling on February 8, 2013.
The rover drilled this hole, in a rock that's part of a flat outcrop researchers named "John Klein," during its first sample drilling on February 8, 2013.
NASA/JPL-Caltech
Curiosity's first set of nighttime photos include this image of Martian rock illuminated by ultraviolet lights. Curiosity used the camera on its robotic arm, the Mars Hand Lens Imager, to capture the images on January 22, 2013.
Curiosity's first set of nighttime photos include this image of Martian rock illuminated by ultraviolet lights. Curiosity used the camera on its robotic arm, the Mars Hand Lens Imager, to capture the images on January 22, 2013.
NASA/JPL-Caltech/MSSS
A view of what NASA describes as "veined, flat-lying rock." It was selected as the first drilling site for the Mars rover.
A view of what NASA describes as "veined, flat-lying rock." It was selected as the first drilling site for the Mars rover.
NASA/JPL-Caltech
Curiosity used a dust-removal tool for the first time to clean this patch of rock on the Martian surface on January 6, 2013.
Curiosity used a dust-removal tool for the first time to clean this patch of rock on the Martian surface on January 6, 2013.
NASA/JPL-Caltech
The Mars rover Curiosity recorded this view from its left navigation camera after an 83-foot eastward drive on November 18, 2012. The view is toward "Yellowknife Bay" in the "Glenelg" area of Gale Crater.
The Mars rover Curiosity recorded this view from its left navigation camera after an 83-foot eastward drive on November 18, 2012. The view is toward "Yellowknife Bay" in the "Glenelg" area of Gale Crater.
NASA/JPL-Caltech
Three "bite marks" made by the rover's scoop can be seen in the soil on Mars surface on October 15, 2012.
Three "bite marks" made by the rover's scoop can be seen in the soil on Mars surface on October 15, 2012.
CNN
The robotic arm on NASA's Mars rover Curiosity delivered a sample of Martian soil to the rover's observation tray for the first time on October 16, 2012.
The robotic arm on NASA's Mars rover Curiosity delivered a sample of Martian soil to the rover's observation tray for the first time on October 16, 2012.
CNN
This image shows what the rover team has determined to be a piece of debris from the spacecraft, possibly shed during the landing.
This image shows what the rover team has determined to be a piece of debris from the spacecraft, possibly shed during the landing.
CNN
The rover's scoop contains larger soil particles that were too big to filter through a sample-processing sieve. After a full-scoop sample had been vibrated over the sieve, this portion was returned to the scoop for inspection by the rover's mast camera.
The rover's scoop contains larger soil particles that were too big to filter through a sample-processing sieve. After a full-scoop sample had been vibrated over the sieve, this portion was returned to the scoop for inspection by the rover's mast camera.
NASA/JPL-Caltech
Curiosity cut a wheel scuff mark into a wind-formed ripple at the "Rocknest" site on October 3, 2012. This gave researchers a better opportunity to examine the particle-size distribution of the material forming the ripple.
Curiosity cut a wheel scuff mark into a wind-formed ripple at the "Rocknest" site on October 3, 2012. This gave researchers a better opportunity to examine the particle-size distribution of the material forming the ripple.
NASA/JPL-Caltech
NASA's Curiosity rover found evidence for what scientists believe was an ancient, flowing stream on Mars at a few sites, including the rock outcrop pictured here. The key evidence for the ancient stream comes from the size and rounded shape of the gravel in and around the bedrock, according to the Jet Propulsion Laboratory/Caltech science team. The rounded shape leads the science team to conclude they were transported by a vigorous flow of water. The grains are too large to have been moved by wind.
NASA's Curiosity rover found evidence for what scientists believe was an ancient, flowing stream on Mars at a few sites, including the rock outcrop pictured here. The key evidence for the ancient stream comes from the size and rounded shape of the gravel in and around the bedrock, according to the Jet Propulsion Laboratory/Caltech science team. The rounded shape leads the science team to conclude they were transported by a vigorous flow of water. The grains are too large to have been moved by wind.
CNN
Curiosity completed its longest drive to date on September 26, 2012. The rover moved about 160 feet east toward the area known as "Glenelg." As of that day the rover had moved about a quarter-mile from its landing site.
Curiosity completed its longest drive to date on September 26, 2012. The rover moved about 160 feet east toward the area known as "Glenelg." As of that day the rover had moved about a quarter-mile from its landing site.
CNN
This image shows the robotic arm of NASA's Mars rover Curiosity with the first rock touched by an instrument on the arm. The photo was taken by the rover's right navigation camera.
This image shows the robotic arm of NASA's Mars rover Curiosity with the first rock touched by an instrument on the arm. The photo was taken by the rover's right navigation camera.
ASA/JPL-Caltech
Researchers used the Curiosity rover's mast camera to take a photo of the Alpha Particle X-Ray Spectrometer. The image was used to see whether it had been caked in dust during the landing.
Researchers used the Curiosity rover's mast camera to take a photo of the Alpha Particle X-Ray Spectrometer. The image was used to see whether it had been caked in dust during the landing.
NASA/JPL-Caltech
Researchers also used the mast camera to examine the Mars Hand Lens Imager on the rover to inspect its dust cover and check that its LED lights were functional. In this image, taken on September 7, 2012, the imager is in the center of the screen with its LED on. The main purpose of Curiosity's imager camera is to acquire close-up, high-resolution views of rocks and soil from the Martian surface.
Researchers also used the mast camera to examine the Mars Hand Lens Imager on the rover to inspect its dust cover and check that its LED lights were functional. In this image, taken on September 7, 2012, the imager is in the center of the screen with its LED on. The main purpose of Curiosity's imager camera is to acquire close-up, high-resolution views of rocks and soil from the Martian surface.
CNN
This is the open inlet where powdered rock and soil samples will be funneled down for analysis. The image is made up of eight photos taken on September 11, 2012, by the imager and is used to check that the instrument is operating correctly.
This is the open inlet where powdered rock and soil samples will be funneled down for analysis. The image is made up of eight photos taken on September 11, 2012, by the imager and is used to check that the instrument is operating correctly.
CNN
This is the calibration target for the imager. This image, taken on September 9, 2012, shows that the surface of the calibration target is covered with a layor of dust as a result of the landing. The calibration target includes color references, a metric bar graphic, a penny for scale comparison, and a stair-step pattern for depth calibration.
This is the calibration target for the imager. This image, taken on September 9, 2012, shows that the surface of the calibration target is covered with a layor of dust as a result of the landing. The calibration target includes color references, a metric bar graphic, a penny for scale comparison, and a stair-step pattern for depth calibration.
CNN
This view of the three left wheels of NASA's Mars rover Curiosity combines two images that were taken by the rover's Mars Hand Lens Imager on September 9, 2012, the 34th day of Curiosity's work on Mars. In the distance is the lower slope of "Mount Sharp."
This view of the three left wheels of NASA's Mars rover Curiosity combines two images that were taken by the rover's Mars Hand Lens Imager on September 9, 2012, the 34th day of Curiosity's work on Mars. In the distance is the lower slope of "Mount Sharp."
NASA
The penny in this image is part of a camera calibration target on NASA's Mars rover Curiosity. The image was taken by the Mars Hand Lens Imager camera.
The penny in this image is part of a camera calibration target on NASA's Mars rover Curiosity. The image was taken by the Mars Hand Lens Imager camera.
NASA
The rover captured this mosiac of a rock feature called 'Snake River" on December 20, 2012.
The rover captured this mosiac of a rock feature called 'Snake River" on December 20, 2012.
NASA/JPL-Caltech
The left eye of the Mast Camera on NASA's Mars rover Curiosity took this image of the rover's arm on September 5, 2012.
The left eye of the Mast Camera on NASA's Mars rover Curiosity took this image of the rover's arm on September 5, 2012.
NASA/JPL-Caltech/MSSS
Sub-image one of three shows the rover and its tracks after a few short drives. Tracking the tracks will provide information on how the surface changes as dust is deposited and eroded.
Sub-image one of three shows the rover and its tracks after a few short drives. Tracking the tracks will provide information on how the surface changes as dust is deposited and eroded.
NASA/JPL/University of Arizona
Sub-image two shows the parachute and backshell, now in color. The outer band of the parachute has a reddish color.
Sub-image two shows the parachute and backshell, now in color. The outer band of the parachute has a reddish color.
NASA/JPL/University of Arizona
Sub-image three shows the descent stage crash site, now in color, and several distant spots (blue in enhanced color) downrange that are probably the result of distant secondary impacts that disturbed the surface dust.
Sub-image three shows the descent stage crash site, now in color, and several distant spots (blue in enhanced color) downrange that are probably the result of distant secondary impacts that disturbed the surface dust.
NASA/JPL/University of Arizona
An image released August 27, 2012, was taken with Curiosity rover's 100-millimeter mast camera, NASA says. The image shows "Mount Sharp" on the Martian surface. NASA says the rover will go to this area.
An image released August 27, 2012, was taken with Curiosity rover's 100-millimeter mast camera, NASA says. The image shows "Mount Sharp" on the Martian surface. NASA says the rover will go to this area.
NASA/JPL-CALTECH
The Mars rover Curiosity moved about 15 feet forward and then reversed about 8 feet during its first test drive on August 22, 2012. The rover's tracks can be seen in the right portion of this panorama taken by the rover's navigation camera.
The Mars rover Curiosity moved about 15 feet forward and then reversed about 8 feet during its first test drive on August 22, 2012. The rover's tracks can be seen in the right portion of this panorama taken by the rover's navigation camera.
NASA/JPL-Caltech
NASA tested the steering on its Mars rover Curiosity on August 21, 2012. Drivers wiggled the wheels in place at the landing site on Mars.
NASA tested the steering on its Mars rover Curiosity on August 21, 2012. Drivers wiggled the wheels in place at the landing site on Mars.
NASA/JPL-Caltech
Curiosity moved its robot arm on August 20, 2012, for the first time since it landed on Mars. "It worked just as we planned," said JPL engineer Louise Jandura in a NASA press release. This picture shows the 7-foot-long arm holding a camera, a drill, a spectrometer, a scoop and other tools. The arm will undergo weeks of tests before it starts digging.
Curiosity moved its robot arm on August 20, 2012, for the first time since it landed on Mars. "It worked just as we planned," said JPL engineer Louise Jandura in a NASA press release. This picture shows the 7-foot-long arm holding a camera, a drill, a spectrometer, a scoop and other tools. The arm will undergo weeks of tests before it starts digging.
NASA/JPL-Caltech
With the addition of four high-resolution Navigation Camera, or Navcam, images, taken on August 18, 2012. Curiosity's 360-degree landing-site panorama now includes the highest point on "Mount Sharp" visible from the rover. Mount Sharp's peak is obscured from the rover's landing site by this highest visible point.
With the addition of four high-resolution Navigation Camera, or Navcam, images, taken on August 18, 2012. Curiosity's 360-degree landing-site panorama now includes the highest point on "Mount Sharp" visible from the rover. Mount Sharp's peak is obscured from the rover's landing site by this highest visible point.
NASA/JPL-Caltech
This composite image, with magnified insets, depicts the first laser test by the Chemistry and Camera, or ChemCam, instrument aboard NASA's Curiosity Mars rover. The composite incorporates a Navigation Camera image taken prior to the test, with insets taken by the camera in ChemCam. The circular insert highlights the rock before the laser test. The square inset is further magnified and processed to show the difference between images taken before and after the laser interrogation of the rock.
This composite image, with magnified insets, depicts the first laser test by the Chemistry and Camera, or ChemCam, instrument aboard NASA's Curiosity Mars rover. The composite incorporates a Navigation Camera image taken prior to the test, with insets taken by the camera in ChemCam. The circular insert highlights the rock before the laser test. The square inset is further magnified and processed to show the difference between images taken before and after the laser interrogation of the rock.
NASA/JPL-Caltech/LANL/CNES/IRAP
An updated self-portrait of the Mars rover Curiosity, showing more of the rover's deck. This image is a mosiac compiled from images taken from the navigation camera. The wall of "Gale Crater," the rover's landing site, can be seen at the top of the image.
An updated self-portrait of the Mars rover Curiosity, showing more of the rover's deck. This image is a mosiac compiled from images taken from the navigation camera. The wall of "Gale Crater," the rover's landing site, can be seen at the top of the image.
NASA/JPL-Caltech
This image shows what will be the rover's first target with it's chemistry and camera (ChemCam) instrument. The ChemCam will fire a laser at the rock, indicated by the black circle. The laser will cause the rock to emit plasma, a glowing, ionized gas. The rover will then analyze the plasma to determine the chemical composition of the rock.
This image shows what will be the rover's first target with it's chemistry and camera (ChemCam) instrument. The ChemCam will fire a laser at the rock, indicated by the black circle. The laser will cause the rock to emit plasma, a glowing, ionized gas. The rover will then analyze the plasma to determine the chemical composition of the rock.
NASA/JPL-Caltech
This image, with a portion of the rover in the corner, shows the wall of "Gale Crater" running across the horizon at the top of the image.
This image, with a portion of the rover in the corner, shows the wall of "Gale Crater" running across the horizon at the top of the image.
NASA/JPL-Caltech
This image, taken from the rover's mast camera, looks south of the landing site toward "Mount Sharp."
This image, taken from the rover's mast camera, looks south of the landing site toward "Mount Sharp."
NASA/JPL-Caltech
In this portion of the larger mosaic from the previous frame, the crater wall can be seen north of the landing site, or behind the rover. NASA says water erosion is believed to have created a network of valleys, which enter "Gale Crater" from the outside here.
In this portion of the larger mosaic from the previous frame, the crater wall can be seen north of the landing site, or behind the rover. NASA says water erosion is believed to have created a network of valleys, which enter "Gale Crater" from the outside here.
NASA
In this portion of the larger mosaic from the previous frame, the crater wall can be seen north of the landing site, or behind the rover. NASA says water erosion is believed to have created a network of valleys, which enter "Gale Crater" from the outside here.
In this portion of the larger mosaic from the previous frame, the crater wall can be seen north of the landing site, or behind the rover. NASA says water erosion is believed to have created a network of valleys, which enter "Gale Crater" from the outside here.
NASA
Two blast marks from the descent stage's rockets can be seen in the center of this image. Also seen is Curiosity's left side. This picture is a mosaic of images taken by the rover's navigation cameras.
Two blast marks from the descent stage's rockets can be seen in the center of this image. Also seen is Curiosity's left side. This picture is a mosaic of images taken by the rover's navigation cameras.
NASA/JPL-Caltech
This color full-resolution image showing the heat shield of NASA's Curiosity rover was obtained during descent to the surface of Mars on August 13, 2012. The image was obtained by the Mars Descent Imager instrument known as MARDI and shows the 15-foot diameter heat shield when it was about 50 feet from the spacecraft.
This color full-resolution image showing the heat shield of NASA's Curiosity rover was obtained during descent to the surface of Mars on August 13, 2012. The image was obtained by the Mars Descent Imager instrument known as MARDI and shows the 15-foot diameter heat shield when it was about 50 feet from the spacecraft.
NASA
This first image taken by the Navigation cameras on Curiosity shows the rover's shadow on the surface of Mars.
This first image taken by the Navigation cameras on Curiosity shows the rover's shadow on the surface of Mars.
NASA
This image comparison shows a view through a Hazard-Avoidance camera on NASA's Curiosity rover before and after the clear dust cover was removed. Both images were taken by a camera at the front of the rover. "Mount Sharp," the mission's ultimate destination, looms ahead.
This image comparison shows a view through a Hazard-Avoidance camera on NASA's Curiosity rover before and after the clear dust cover was removed. Both images were taken by a camera at the front of the rover. "Mount Sharp," the mission's ultimate destination, looms ahead.
NASA
The four main pieces of hardware that arrived on Mars with NASA's Curiosity rover were spotted by NASA's Mars Reconnaissance Orbiter. The High-Resolution Imaging Science Experiment camera captured this image about 24 hours after landing.
The four main pieces of hardware that arrived on Mars with NASA's Curiosity rover were spotted by NASA's Mars Reconnaissance Orbiter. The High-Resolution Imaging Science Experiment camera captured this image about 24 hours after landing.
NASA
This view of the landscape to the north of NASA's Mars rover Curiosity was acquired by the Mars Hand Lens Imager on the first day after landing.
This view of the landscape to the north of NASA's Mars rover Curiosity was acquired by the Mars Hand Lens Imager on the first day after landing.
NASA
This is one of the first pictures taken by Curiosity after it landed. It shows the rover's shadow on the Martian soil.
This is one of the first pictures taken by Curiosity after it landed. It shows the rover's shadow on the Martian soil.
NASA/JPL/Caltech
This image shows Curiosity's main science target, "Mount Sharp." The rover's shadow can be seen in the foreground. The dark bands in the distances are dunes.
This image shows Curiosity's main science target, "Mount Sharp." The rover's shadow can be seen in the foreground. The dark bands in the distances are dunes.
NASA/JPL/Caltech
NASA's Curiosity rover was launched from Cape Canaveral Air Force Station in Florida on November 26, 2011. NASA's Mars Curiosity Rover, touched down on the planet on August 6, 2012.
NASA's Curiosity rover was launched from Cape Canaveral Air Force Station in Florida on November 26, 2011. NASA's Mars Curiosity Rover, touched down on the planet on August 6, 2012.
NASA
NASA's Mars Curiosity Rover

Story highlights

Popular NASA rover sends back a new selfie after government shutdown

Curiosity Rover is working long past its original mission

CNN  — 

NASA’s popular Mars Curiosity Rover has sent back a new selfie from the red planet. The image shows the rover’s “head” peaking above the dusty martian surface.

“I’m back! Did you miss me?” the rover (well, actually its social media team) tweeted.

The selfie was in the first batch of images the spacecraft sent back to its mission team after the government shutdown.

Curiosity landed on Mars on August 6, 2012 at Gale Crater after surviving the much-publicized “seven minutes of terror” descent to the surface. (We could try to describe it, but you really should just watch the video.)

The rover was sent to Mars on a 23-month mission to hunt evidence that Mars could have supported microbial life in the distant past. But NASA said the spacecraft knocked that job out in 8 months – collecting a rock sample that showed ancient Mars could have supported microbes.

Since Curiosity still was in great shape, NASA gave it more work extending the mission and sent Curiosity into overtime to continue drilling samples of the surface and to monitor the environment.

Curiosity may be getting some company soon. The new Mars InSight lander passed what NASA called a key test on Tuesday – stretching out its solar panels. The panels will power the probe for at least two Earth years while it studies Mars’ deep interior to help scientists understand how rocky planets evolved. (InSight’s full name is Interior Exploration using Seismic Investigations, Geodesy and Heat Transport.)

The launch window for InSight opens May 5, 2018, at Vandenberg Air Force Base in California. If it goes up that day, InSight would land on November 26, 2018, NASA says.

InSight will carry with it about 2.4 million names submitted by the public. “It’s a fun way for the public to feel personally invested in the mission,” Bruce Banerdt, the mission’s principal investigator, said in statement. “We’re happy to have them along for the ride.”